Dust control is an integral part of the Festool system and design philosophy. That is why the CT 26 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. This represents greater efficiency in dust extraction, noise reduction, and with less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks.

HEPA Filters
HEPA filters are standard and remove 99.99% of particulate to 0.3 micron. In fabrication, dust happens. It's very small, floats everywhere, lands on everything in sight, and gets inside your tools. Due to its minute size, wood dust particles can be particularly troublesome to remove from an environment once airborne. The fine dust that is ejected into the air can make you sneeze, cough, and experience other allergy-like symptoms. Experts agree that limiting your exposure is the best protection.


Convenient Carry Handle
An ergonomic handle is positioned 7-9 inches in from the body, which is the most natural position for lifting. The supplied antistatic hose stores neatly into the integrated hose garage, a standard feature on all current dust extractor models. The hose garage also protects your hose from inadvertent damage during transit. A dust extractor that is designed properly will offer convenient storage solutions for keeping the hoses and accessories well organized and readily available. On-board cradles, handles, and the ability to use the flat top as a temporary shelf to support tools are nice features that you should consider.


Sys-Dock
Festool's ingenious Sys-Dock feature turns your dust extractor into a mobile cart for your tools and accessories. Festool Systainers, the carrying cases which are standard with nearly every Festool power tool, latch to the top of our dust extractors allowing you to move tools together, reducing steps when setting up your jobsite. The Sys-Dock is also flat, serving as a convenient place to rest your tool or materials while you work.


Self-Cleaning Filter Bag
The new Cleantex CT 26 model features a self-cleaning filter bag that solves a problem that plagues other dust extractors and vacuums. During normal use, fine particles of dust cling to the inner lining of the filter bag resulting in caking. This coating of dust lowers the effective suction power dramatically resulting in poor extraction efficiency and performance. Caking can also cause additional strain on your dust extractor's motor and contribute to premature failure.

This unit comes standard our new self-cleaning bag which prevents dust particles from caking inside the bag which reduces suction. We further optimize efficiency with the low-profile, flat-top design that allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers (not included) for easy transport and storage. The low center of gravity, integrated center handle, and extra large wheels make navigating rough terrain in the shop or jobsite easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. anti-static (AS) hose is long enough for power tool and general work site clean up tasks.

For wet (water) clean up tasks, the CT will shut off automatically when full thanks to Level Stop technology. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. With 137 CFM and only 62 dB (on the low setting), the CT 26 can quickly and quietly remove large amounts of debris, with minimal noise. A HEPA filter comes standard and offers the ultimate in clean air and filtration. The CT 26 is a good choice for the shop or the jobsite for all your power tool extraction and clean-up needs.

INCLUDES

27mm Antistatic Hose
Cord Wrap
Hose Garage
Self-Cleaning Filter Bag

 

SPECS

Container Capacity	6.9 gal. (26 liters)
Dimensions (in.)	24.8 x 14.4 x 21.3
Filter Bag Capacity	6.3 gal.
Filter Type	HEPA
Max. Suction Force	137 CFM
Noise Level	62 - 72 db(A)
Static Water Lift	96"
Weight	28.7 lbs.