You might even think it is a portable shaper

The OF 2200 is our most powerful router. It can easily plunge into 8/4 hard maple and make a 1/2" groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop.

Magnetic Spindle Brake
The Magnetic Spindle Brake of the OF 2200 is a faster, more reliable method of retarding spindle motion. The use of magnetic force to stop the spindle also prolongs the service life of the motor versus a mechanical or electronic method.


Triple Bearing Design
The OF 2200 Router features a Triple Bearing Design which dampens spindle and bit deflection. With bearings at the top, middle and bottom, the spindle is less likely to wobble. This is particularly important considering the sheer power of the OF 2200 and the centrifugal forces exerted with spinning large bits at speeds up to 22,000 RPM.


Locking Depth Stop Rod
The Locking Depth Stop Rod allows you save time by locking the OF 2200 in its plunged position and calibrate the plunge depth using the four-position depth stop turret in a single step. Dial the micro-adjustment knob in increments of 1/256" (1/10mm) for the ultimate plunge depth precision.


Four Position Depth Stop
TurretControl plunge depth with the ability to set pre-configurable depths using the four-position turret. An integrated 5/64" (2mm) offset position saves valuable time allowing you to easily make a finish pass after making an initial pass without having to reset the plunge depth.


INCLUDES

Chip catcher
Collet—1/2"
Dust extraction hood
Standard U.S. guide bushing adapter
Systainer	SYS 4

SPECS

Collet diameter range	1/4", 1/2", and 8 mm
Drive shaft speed	10,000 - 22,000 rpm
Max. Bit Diameter	3-1/2" (89 mm)
Power consumption	2200 watts / 18 amps 120 v AC
Quick depth adjustment range	3 5/32" (80 mm)
Weight	17.2 lbs. (7.8 kg)